Replacement Power Steering Kit Features A Remanufactured Delphi 600 Steering Box 12.7:1 Ratio Is Quicker Than Original Steering Includes All Parts Needed to Complete The Conversion Requires Flex Coupler P/N 53-229 Or 53-230 Not For Use With Stick Shift Manual Columns Installation Of This Kit Requires Use Of An Alernator & Relocation Of The Alternator Using P/N 18-115 Or Similar This Chevy Delphi steering kit is an excellent way to upgrade your classic to modern steering if you wish to stay with a steering box. You won't believe how well your classic Chevy drives once you install this Delphi steering kit. Its internal rack spool and 12.7:1 ratio gives quick, precise steering and road feel. All major components, hardware and instructions needed to complete the installation are included; the only other item you need to choose is the appropriate flex coupler. Your engine must be a short water pump small block Chevy with a harmonic balancer that accepts bolt-on pulleys. If your balancer is the riveted-pulley type, order harmonic balancer P/N 18-35. This Delphi power steering kit can be used with the original steering column mast or an ididit tilt column. When using the original column shift steering column, it must be shortened using P/N 53-400 conversion kit in order to make room for the proper flex coupler. If converting to a floor shift, P/N 53-401 must be used. All of the original standard steering linkage is maintained while the stock steering box is removed and no longer used. Any type of header or cast iron manifold exhaust system will fit with the Delphi kit. If you want a classic that truly drives like a brand new car, install our Chevy Delphi steering kit!
| Make | Model | Years |
| Chevrolet | Bel Air | 1955 - 1957 |
| Chevrolet | Nomad | 1955 - 1957 |
| Chevrolet | One-Fifty Series | 1955 - 1957 |
| Chevrolet | Two-Ten Series | 1955 - 1957 |
