Stock Replacement Original GM Part Stamped Steel Semi-Gloss Black Fits 6-Cylinder Engines Using A 10? Bellhousing & 153 Tooth Flywheel For Manual Transmissions Fits 1962-1969 Nova Models Whether you are hearing unwanted rattling vibrations from your transmission, or you're starting to experience clutch failure, chances are that you are in great need of a new flywheel bellhousing dust cover plate for your 1962, 1963, 1964, 1965, 1966, 1967, 1968, or 1969 Nova with an 10.5 clutch and manual transmission. Without a dust cover inspection plate or with one that is very worn down, your ring gear is exposed to constant dirt and road debris. Over time, debris and other objects can clog up your flywheel and clutch area, causing premature clutch failure. Clutch failure in your Chevrolet can be reported from a feeling of slipping, where the clutch does not fully engage or disengage. Further wear on your clutch can cause overheating until the clutch will eventually fail altogether, which can be a dangerous situation. This original GM metal plate for your six cylinder Nova engine attaches to the bellhousing and promises to protect the flywheel and clutch from any future road debris. This dust shield will also keep outside debris away from your ring gear and flexplate. You will not have to remove your transmission to apply a new dust cover inspection plate, so installation should be simple and effective.
| Make | Model | Years |
| Chevrolet | Chevy II | 1962 - 1968 |
| Chevrolet | Nova | 1969 |
