855.444.6872 Contact Us Mon-Sat 10a-6p
DRIVEN BY CARE

Earl's Speed-Flex Hyperfirm® Pre-Made Hose 64191926ERL

Earl's Speed-Flex Hyperfirm® Pre-Made Hose 64191926ERL
$48.44$57.99 ea
NEWLOW STOCK ALERT!Only 1 Left in Stock
Model: 4001469
STANDARD
DELIVERY
STORE PICKUP
[More Info]
Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi.
Features:
  • Extruded PTFE
  • Standard Of Racing Industry
  • For Flexible Brake & Clutch Hoses
  • For Instrument Hoses
  • Pressure Tested To 4000 PSI
  • Firmer Brake Feel
We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.
Installation Notes:
We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.

About Earl's Performance

Earl's Performance Products was founded by Earl Fouts in 1955 in Lawndale, California. The mission was to supply high-quality military aircraft surplus plumbing components directly to the racing industry from a small retail outlet. As the military surplus market dried up, Earl recognized the need for continuity of supply for the racing market and pioneered the Earl's range of hoses and fittings that are still used today. In doing so he created the racing aftermarket plumbing industry.

Specifications:

Emission Code 5
Fluid Type Pump Gas, Diesel, Automatic Transmission Fluid, Coolant, Oil, Race Gas, Bio-Fuels, E85, Methanol/Alcohol, Brake Fluid
Fluid Type Rating - Automatic Transmission Fluid 5 out of 5 Rating
Fluid Type Rating - Bio-Fuels 5 out of 5 Rating
Fluid Type Rating - Brake Fluid 5 out of 5 Rating
Fluid Type Rating - Coolant 5 out of 5 Rating
Fluid Type Rating - Diesel 5 out of 5 Rating
Fluid Type Rating - E85 5 out of 5 Rating
Fluid Type Rating - Methanol/Alcohol 5 out of 5 Rating
Fluid Type Rating - Oil 5 out of 5 Rating
Fluid Type Rating - Power Steering Fluid 5 out of 5 Rating
Fluid Type Rating - Pump Gas 5 out of 5 Rating
Fluid Type Rating - Race Gas 5 out of 5 Rating
Fluid Type Rating - Vacuum 1 out of 5 Rating
Hose End #1 4 AN FEMALE
Hose End #2 4 AN FEMALE
Hose End Finish Electroless Nickel Plated
Hose End Material Steel
Hose Outer Material Stainless Steel
Hose Size 4 AN
Inside Diameter .173"-.203"
Length 26 In.
Max Working PSI 2000 PSI
Min. Bend Radius 1.5"
Outside Diameter .304"-.343"
Part Type Fuel Hose
Product Type Hose Assembly
Proposition 65 www.P65Warnings.ca.gov
PTFE Wall Thickness .040"
Submersible in Fuel Yes
Temperature Range -65⁰ to 450⁰ F

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Earl's Speed-Flex Hyperfirm® Pre-Made Hose 64191926ERL:
Muscle Cars & Classics 2024